HP 14-g000 Maintenance and Service Guide - Page 64
Memory module, on each side of the memory module slot to release the memory module.
View all HP 14-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Memory module Description 8-GB (PC3L, 12800, 1600-MHz) 4-GB (PC3L, 12800, 1600-MHz) 2-GB (PC3L, 12800, 1600-MHz) Spare part number 693374-001 691740-001 691739-001 Before removing a memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 49). 5. Remove the service cover (see Service cover on page 55). To remove a memory module: 1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) 2. Remove the memory module (2) by pulling it away from the slot at an angle. Reverse this procedure to install a memory module. 56 Chapter 4 Removal and replacement procedures