HP 14-g000 Maintenance and Service Guide - Page 96
and then pull the board away from the computer to remove
View all HP 14-g000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
2. Remove the three Phillips PM2.5×4.0 screws (1) that secure the system board to the computer. 3. Lift the right side of the system board (2), and then pull the board away from the computer to remove it. Reverse this procedure to install the system board. 88 Chapter 4 Removal and replacement procedures
2.
Remove the three Phillips PM2.5×4.0 screws
(1)
that secure the system board to the computer.
3.
Lift the right side of the system board
(2)
, and then pull the board away from the computer to remove
it.
Reverse this procedure to install the system board.
88
Chapter 4
Removal and replacement procedures