HP 14t-r000 HP 14 Notebook PC Compaq 14 Notebook PC HP 240 G3 Notebook PC HP 2 - Page 71
USB board, Remove the Phillips PM2.5×3.0 screw
View all HP 14t-r000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
USB board Description USB board (includes cable) Spare part number 757608-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45), and then remove the following components: ● Service cover (see Service cover on page 51) ● Keyboard (see Keyboard on page 53) ● Top cover (see Top cover on page 56) To remove the USB board: 1. Position the computer upright. 2. Lift the ZIF connector (1), and then disconnect the USB board cable from the system board (2). 3. Remove the Phillips PM2.5×3.0 screw (3) that secures the USB board to the base enclosure. 4. Remove the USB board (4). Reverse this procedure to install the USB board. Component replacement procedures 63