HP 15-f200 Maintenance and Service Guide - Page 57
Power button board, Remove the Phillips M2.5×2.5 screw
View all HP 15-f200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Reverse this procedure to reassemble and install the hard drive. Power button board Description Power button board (includes cable) Spare part number 776780-001 Before removing the power button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 28), and then remove the following components: a. Optical drive (see Optical drive on page 33). b. Service door (see Service door on page 29). c. WLAN module (see WLAN module on page 31). d. Memory module (see Memory module on page 30). e. Keyboard (see Keyboard on page 38). f. Top cover (see Top cover on page 40). Remove the power button board: 1. Turn the top cover upside down, with the front toward you. 2. Remove the Phillips M2.5×2.5 screw (1) that secures the power button board to the top cover. Component replacement procedures 47