HP 15-f200 Maintenance and Service Guide - Page 76
Hard drive see
View all HP 15-f200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Description Display enclosure for use in red models (includes 2 rubber screw covers) Display enclosure for use in silver models (includes 2 rubber screw covers) Spare part number 832757-001 836862-001 NOTE: The display assembly is spared both together and at the subcomponent level. For more display assembly spare part information, see the individual removal subsections. Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 28), and then remove the following components: a. Optical drive (see Optical drive on page 33). b. Service door (see Service door on page 29). c. WLAN module (see WLAN module on page 31). d. Memory module (see Memory module on page 30). e. Keyboard (see Keyboard on page 38). f. Top cover (see Top cover on page 40). g. Hard drive (see Hard drive on page 44). h. System board (see System board on page 52). Remove the display assembly: 1. Remove the three Phillips M2.5×5.0 screws (1) and Phillips M2.5×2.5 broadhead screw (2) that secures the display assembly to the base enclosure. 66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts