HP 15-f200 Maintenance and Service Guide - Page 59
TouchPad button board, Remove the TouchPad button board
View all HP 15-f200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
TouchPad button board Description TouchPad button board (includes cable) Spare part number 732078-001 Before removing the TouchPad button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 28), and then remove the following components: a. Optical drive (see Optical drive on page 33). b. Service door (see Service door on page 29). c. WLAN module (see WLAN module on page 31). d. Memory module (see Memory module on page 30). e. Keyboard (see Keyboard on page 38). f. Top cover (see Top cover on page 40). Remove the TouchPad button board: 1. Turn the top cover upside down, with the front toward you. 2. Release the TouchPad ZIF connector, and then disconnect the TouchPad button board cable (1) from the TouchPad board. 3. Remove the Phillips M2.0×3.5 broadhead screw (2) that secures the TouchPad button board bracket to the top cover. Component replacement procedures 49