HP 15-f200 Maintenance and Service Guide - Page 73
Power connector cable, Hard drive see
View all HP 15-f200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Power connector cable Description Power connector cable (includes bracket) Spare part number 732067-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 28), and then remove the following components: a. Optical drive (see Optical drive on page 33). b. Service door (see Service door on page 29). c. WLAN module (see WLAN module on page 31). d. Memory module (see Memory module on page 30). e. Keyboard (see Keyboard on page 38). f. Top cover (see Top cover on page 40). g. Hard drive (see Hard drive on page 44). h. System board (see System board on page 52). Remove the power connector board: NOTE: The power connector bracket was removed when removing the system board. 1. Turn the system board upside down, with the front toward you. 2. Release the power connector from the clip built into the system board. Component replacement procedures 63