HP 2000-2100 Maintenance and Service Guide - Page 57
Hard drive, Remove the memory module/wireless module compartment cover see
View all HP 2000-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, hard drive connector cable, or screws. Description 750-GB, 5400-rpm, 9.5-mm 640-GB, 5400-rpm, 9.5-mm 500-GB, 5400-rpm, 9.5-mm 320-GB, 5400-rpm, 9.5-mm Hard Drive Hardware Kit (includes hard drive bracket, hard drive connector cable, and screws) Spare part number 634250-001 669300-001 669299-001 622643-001 686261-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the memory module/wireless module compartment cover (see Memory module on page 39). Remove the hard drive: 1. Loosen the captive screw (1) that secures the hard drive compartment cover to the computer. 2. Lift the rear edge of the hard drive compartment cover (2) up and forward until it rests at an angle. Component replacement procedures 49