HP 2000-2100 Maintenance and Service Guide - Page 62
Remove the top cover
View all HP 2000-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Remove the top cover: 1. Remove the six Phillips PM2.5×6.5 screws (1) and the two Phillips PM2.5×10.0 screws (2) that secure the top cover to the computer. 2. Remove the four Phillips PM2.0×2.5 screws on the rear edge of the battery bay and in the hard drive bay that secure the top cover to the computer. 3. Remove the four Phillips PM2.5×4.0 screws on the front edge of the battery bay and near the hard drive connector that secure the top cover to the computer. 54 Chapter 4 Removal and replacement procedures
Remove the top cover:
1.
Remove the six Phillips PM2.5×6.5 screws
(1)
and the two Phillips PM2.5×10.0 screws
(2)
that
secure the top cover to the computer.
2.
Remove the four Phillips PM2.0×2.5 screws on the rear edge of the battery bay and in the hard
drive bay that secure the top cover to the computer.
3.
Remove the four Phillips PM2.5×4.0 screws on the front edge of the battery bay and near the hard
drive connector that secure the top cover to the computer.
54
Chapter 4
Removal and replacement procedures