HP 2000-2100 Maintenance and Service Guide - Page 71
Speakers, Disconnect the speaker cable
View all HP 2000-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Speakers Description Speakers (include speaker cables) Spare part number 686279-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 38), and then remove the following components: a. Memory module/wireless module compartment cover (see Memory module on page 39) b. Keyboard (see Keyboard on page 43) c. Hard drive (see Hard drive on page 49) d. Top cover (see Top cover on page 53) Remove the speakers: 1. Disconnect the speaker cable (1) from the system board. 2. Release the speaker cable from the clips (2) and routing channel built into the base enclosure. 3. Remove the two Phillips PM2.5×4.0 screws (3) that secure the speakers to the base enclosure. Component replacement procedures 63