HP 4000n HP LaserJet 4000 Printer Series - HP LaserJet 4000, 4000 T, 4000 N, a - Page 58
From the Printing Menu set, the paper size dial is set to Custom
UPC - 008869819917
View all HP 4000n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
If the settings are not available from the software, set the custom paper size from the control panel: 1 From the Printing Menu set%10(+)74'%7561/2#2'4;'5. 2 From the Printing Menu, select inches or millimeters as the unit of measurement. 3 From the Printing Menu, set the X dimension (the front edge of the paper) as shown in Figure 15. X can be 3 to 8.5 inches (76 to 216 mm). 4 Set the Y dimension (the side edge of the paper) as shown in Figure 15. Y can be 5 to 14 inches (127 to 356 mm). 5 If custom paper is loaded into Tray 1 and 64#;/1&'%#55'66', then set 64#;5+
EN
Chapter 2:
Printing Tasks
47
If the settings are not available from the software, set the custom
paper size from the control panel:
1
From the Printing Menu set
²%10(+)74’²%7561/²2#2’4±;’5
.
2
From the Printing Menu, select inches or millimeters as the unit
of measurement.
3
From the Printing Menu, set the X dimension (the front edge of
the paper) as shown in Figure 15. X can be 3 to 8.5 inches (76 to
216 mm).
4
Set the Y dimension (the side edge of the paper) as shown in
Figure 15. Y can be 5 to 14 inches (127 to 356 mm).
5
If custom paper is loaded into Tray 1 and
64#;²³²/1&’±%#55’66’
,
then set
64#;²³²5+<’±%7561/²
from the Paper Handling Menu in
the printer’s control panel. See “Customizing Tray 1 Operation” on
page 50.
If custom paper is loaded in the optional 500-sheet tray, be sure
the paper size dial is set to Custom (page 29).
6
In the software, select
Custom
as the paper size.
For example, if the custom paper is 8 by 10 inches (203 by 254
mm),
set X=8 inches and Y=10 inches (X=203 millimeters and Y=254
millimeters).
The control panel must be set if the PCL 5e driver is used, or custom
paper is loaded long-edge first (X is longer than Y).