HP 4000n HP LaserJet 4000 Printer Series - HP LaserJet 4000, 4000 T, 4000 N, a - Page 88
then return, Do not leave
UPC - 008869819917
View all HP 4000n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Printer Messages (Continued) Message Explanation or Recommended Action 9410)'08'.12' The envelope feeder you are trying to install will not work for this (''&'4+056#..'& printer. Z2#2'4,#/ =.1%#6+10? Remove jammed paper from the specified location. Open and close the top cover to clear the message. If the message persists after all jams have been cleared, a sensor might be stuck or broken. Contact an HP-authorized service or support provider. (See the HP Support pages at the front of this user's guide.) +057((+%+'06 /'/14; alternates with 24'55)161 %106+07' The printer received more data than can fit in its available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics. Press [Go] to print the transferred data (some data might be lost), then simplify the print job or install additional memory. 2#)'611 %1/2.': alternates with 24'55)161 %106+07' The data (dense text, rules, raster or vector graphics) sent to the printer was too complex. Press [Go] to print the transferred data. (Some data might be lost.) To print the job without losing data, from the Configuration Menu in the printer control panel, set 2#)'2416'%610, print the job, and then return 2#)'2416'%6#761. Do not leave 2#)' 2416'%610; it might degrade performance. If this message appears often, simplify the print job. '+1Z $7(('418'4(.19 alternates with 24'55)161 %106+07' Too much data was sent to the EIO card in the specified slot (Z). An improper communications protocol may be in use. Press [Go] to clear the message. (Data will be lost.) Check the host configuration. If this message persists, contact an HP-authorized service or support provider. (See the HP Support pages at the front of this user's guide.) EN Chapter 4: Problem Solving 77