HP 4500 HP Color LaserJet 4500, 4500 N, 4500 DN Printer - Quick Reference Guid - Page 17

Y=Yellow, K=Black., C=Cyan, M=Magenta

Get HP 4500 - DesignJet Color Inkjet Printer PDF manuals and user guides View all HP 4500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Common Control Panel Messages (Continued) Control Panel Description Recommended Action Message 1 TONER CMYK OUT The printer is out of the Replace the specified toner alternates with specified color of toner cartridge (see the PRESS SELECT (C=Cyan, M=Magenta, installation guide included TO CHANGE TONER Y=Yellow, K=Black). with the toner cartridge). The printer will stop printing if configured as TONER OUT=STOP in the control panel. TRANSFER KIT LOW REPLACE KIT The transfer kit is near the end of its expected life. The transfer kit could be replaced. Then reset the message using the Resets menu. TRAY X LOAD [TYPE] [SIZE] The specified media type and size needs to be loaded into the requested input tray. Load the proper size or type of media into the specified tray and press GO to return the printer to the READY state. TRAY X OPEN Tray 2 or 3 is open. Close the specified tray. TRAY X TYPE [MEDIA TYPE] or TRAY X SIZE [MEDIA SIZE] The size or type of media loaded in the specified tray needs to be verified. Configure the media size or type for the specified tray. See the chapter in this guide on configuring trays. EN Using the Printer Control Panel 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
EN
Using the Printer Control Panel
5
1
TONER CMYK OUT
alternates with
PRESS SELECT
TO CHANGE TONER
The printer is out of the
specified color of toner
(C=Cyan, M=Magenta,
Y=Yellow, K=Black).
Replace the specified toner
cartridge (see the
installation guide included
with the toner cartridge).
The printer will stop printing
if configured as TONER
OUT=STOP in the control
panel.
TRANSFER KIT LOW
REPLACE KIT
The transfer kit is near the
end of its expected life.
The transfer kit could be
replaced. Then reset the
message using the Resets
menu.
TRAY X LOAD
[TYPE] [SIZE]
The specified media type
and size needs to be
loaded into the requested
input tray.
Load the proper size or type
of media into the specified
tray and press
G
O
to return
the printer to the READY
state.
TRAY X OPEN
Tray 2 or 3 is open.
Close the specified tray.
TRAY X TYPE
[MEDIA TYPE]
or
TRAY X SIZE
[MEDIA SIZE]
The size or type of media
loaded in the specified
tray needs to be verified.
Configure the media size or
type for the specified tray.
See the chapter in this guide
on configuring trays.
Common Control Panel Messages (Continued)
Control Panel
Message
Description
Recommended Action