HP 4500 HP Color LaserJet 4500, 4500 N, 4500 DN Printer - Quick Reference Guid - Page 33
The paper path for Tray 3 passes through Tray 2. Verify that, this on configuring input trays.
![]() |
View all HP 4500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
6 Slide the media-width guides in until they hold the media firmly in place without bending it. 7 Verify that media lays flat in the tray and that it fits under the metal tabs (4). 8 Set the media-size knob (5), located on the side of the tray, to the size of media you loaded. 9 Insert Tray 3 into the printer. 10 Change your printer driver settings to recognize Tray 3. Note 2 To configure Tray 3 for media type, see the section earlier in this chapter on configuring input trays. Note The paper path for Tray 3 passes through Tray 2. Verify that Tray 2 is closed before printing from Tray 3. Note Load prepunched paper with the holes as shown in the illustration. For two-sided printing, load media with the front side facing up. EN Loading Media 21
![](/manual_guide/products/hewlettpackard-4500-hp-color-laserjet-4500-4500-n-4500-dn-printer-quick-reference-guide-c408490919-bde7060/33.png)