HP 6125XLG R2306-HP 6125XLG Blade Switch TRILL Command Reference
HP 6125XLG Manual
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 6125XLG manual content summary:
- HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 1
HP 6125XLG Blade Switch TRILL Command Reference Part number: 5998-3742 Software version: Release 2306 Document version: 6W100-20130912 - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 2
, or use of this material. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 3
Contents TRILL commands 1 display trill adjacent-table 1 display trill brief 1 display trill fib 2 27 trill timer holding-multiplier 28 trill timer lsp 29 Support and other resources 31 Contacting HP 31 Subscription service 31 Related information 31 Documents 31 Websites 31 Conventions - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 4
trill adjacent-table count Total number of TRILL ADJ entries: 3 Table 1 Command output Field NextHop MAC address Interface Total number of TRILL ADJ entries Description Nickname of the next-hop RB. MAC address of the next-hop RB. Outgoing port of frames. Number of entries in the TRILL adjacency - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 5
Syntax display trill brief Views Any view Predefined user roles network-admin network-operator Examples # Display brief LSP-max-age: 1200s LSP-refresh: 900s Interval between SPFs: 10ms Table 2 Command output Field Network entity Nickname Tree-root priority Cost style Maximum allowed LSP received - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 6
Table 3 Command output Field Destination HopCount NextHop Interface Total number of TRILL FIB destinations Total number of TRILL FIB entries Description Nickname of the destination RB. Number of hops to the destination RB. Nickname of the next hop RB. Outgoing port of frames. Number of destination - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 7
number of interfaces in the process. Remaining time of the T2 timer (in seconds). The initial value of the field is fixed at 60 seconds for GR of the Restart type and is the value (300 seconds by default) set by using the graceful-restart interval command for GR of the Start type. Port - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 8
trill interface [ interface-type interface-number ] Views Any view Predefined user roles network-admin network-operator Parameters interface-type interface-number: Specifies an interface by its type and number. If no interface is specified, the command displays TRILL information about all interfaces - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 9
Command milliseconds. Maximum number of LSPs transmitted per time. Link cost of the port. Inhibition port. display trill lsdb Use display trill lsdb to display TRILL link state database (LSDB) information. Syntax display trill lsdb [ local | lsp-id lsp-id | verbose ] * Views Any view Predefined user - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 10
.Pseudonode ID-fragment num, where SYSID is the SystemID of the originating node or pseudo-node and fragment num is the fragment number of the LSP. If no LSP is specified, the command displays information about all LSPs. verbose: Displays detailed information. If this keyword is not specified, the - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 11
of the LSP (in seconds). LSP length. Whether the Overload flag in the LSP is set: • 0-Not set. • 1-Set. Number of the originating RB. Highest TRILL version supported by the originating RB. Nickname information about the originating RB: • Nickname-Nickname of the RB. • Priority-Priority to hold the - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 12
[ local-entry | remote-entry ] ] Views Any view Predefined user roles network-admin network-operator Parameters vlan vsan-id: Displays the information the command displays information about all VLANs. local-entry: Displays information about local ingress entries. The frames sent out of the ports in - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 13
Nickname of the root bridge. Ports of the entry. display trill user roles network-admin network-operator Parameters nickname nickname: Displays information about the RB specified by its nickname. The nickname is a hexadecimal number in the range of 0x1 to 0xFFFE. If no RB is specified, the command - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 14
includes the next-hop outgoing port list for multicast frames, broadcast frames, and unknown unicast frames based on the multicast distribution trees argument is a hexadecimal number in the range of 0x0 to 0xFFFF. If this option is not specified, the command displays information about the TRILL - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 15
to vlan-id parameters. If no VLAN is specified, the command displays information about all VLANs. mac-address mac-address: Displays information about a 10, 13, 40, 60 to 85, 200, 1001 List of outgoing ports: FGE1/1/1 FGE1/1/2 FGE1/1/3 # Display the TRILL multicast routing table information for - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 16
end does not decapsulate the TRILL frame. • True-The local end decapsulates the TRILL frame and forwards the frame. Outgoing port list. None indicates that no outgoing port exists. VLAN list. None indicates that no VLAN exists. Port list of the IPv4 multicast router. Port list of the IPv6 multicast - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 17
State: Up HoldTime: 8s DRB priority: 64 Nickname: 0x899b Uptime: 00:38:15 Table 11 Command output Field System ID Interface Circuit ID State Description System ID of the neighbor. Local TRILL port directly connected to the neighbor. LSP number of the pseudo node. Neighbor state: • Up. • Down. 14 - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 18
rooted at the specified RB. The nickname argument is a hexadecimal number in the range of 0x0 to 0xFFFF. Usage guidelines The TRILL RPF check table is used to check whether the incoming port of a broadcast, multicast, or unknown unicast frame is valid. According to the nicknames of the egress RB - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 19
: 0x899b NextHop count: 2 Interface: FGE1/1/1 Table 13 Command output Neighbor ID: 0x0101 NextHop: Direct Field Destination Interface NextHop NextHop count Neighbor ID Description Nickname of the destination RB. Outgoing port. Nickname of the next hop RB. Number of next hops. ID of the neighbor - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 20
undo graceful-restart interval Default The GR restart interval is 300 seconds for TRILL. Views TRILL view Predefined user roles network-admin Parameters interval: Specifies the GR restart interval for TRILL, which is in the range of 30 to 1800 seconds. Examples # Configure the restart interval as - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 21
-peer-change enable undo log-peer-change enable Default Logging of TRILL neighbor changes is enabled. Views TRILL view Predefined user roles network-admin Usage guidelines This command outputs logs of TRILL neighbor changes to the configuration terminal. Examples # Disable logging of TRILL neighbor - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 22
-age Use timer lsp-max-age to configure the maximum age of LSPs. Use undo timer lsp-max-age to restore the default. Syntax timer lsp-max-age time undo timer lsp-max-age Default The LSP maximum age is 1200 seconds. Views TRILL view Predefined user roles network-admin Parameters time: Specifies the - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 23
commands • timer lsp-refresh • trill timer lsp timer lsp-refresh Use timer lsp-refresh to configure the LSP refresh interval. Use undo timer lsp-refresh to restore the default determined by both the minimum LSP interval and the maximum number of LSPs transmitted per time. To prevent LSPs from being - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 24
priority 65535 trees calculate Use trees calculate to set the number of distribution trees that the RB wants all RBs to compute. Use undo trees calculate to restore the default. Syntax trees calculate count undo trees calculate Default The RB wants all RBs to compute one distribution tree. Views - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 25
range of 1 to 15. Examples # Set the number of distribution trees that the RB wants all RBs default. Syntax trill announcing-vlan { vlan-list | null } undo trill announcing-vlan { vlan-list | null } Defaults No announcing VLAN is configured. The announcing VLANs are the enabled VLANs. Views Ethernet - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 26
except Hello frames between RBs. On the HP 6125XLG Blade switch of Release 2306, the designated VLAN of a link is the lowest-numbered enabled VLAN. • ∩ and ∪-Set operation symbols. ∩ indicates set-theoretic intersection, and ∪ indicates set-theoretic union. Configuration in Ethernet interface view - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 27
enable Use trill enable to enable TRILL on a port. Use undo trill enable to disable TRILL on a port. Syntax trill enable undo trill enable Default TRILL is disabled on a port. Views Ethernet interface view, aggregate interface view Predefined user roles network-admin Usage guidelines To enable TRILL - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 28
must disable the spanning tree feature on TRILL ports. For more information about the spanning tree feature, see Layer 2-LAN Switching Configuration Guide. Configuration in Ethernet interface view takes effect on only the current port. Configuration in aggregate interface view takes effect on the - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 29
inhibited to configure the inhibition time. Use undo trill timer avf-inhibited to restore the default. Syntax trill timer avf-inhibited time undo trill timer avf-inhibited Default The inhibition time is 30 seconds. Views Ethernet interface view, aggregate interface view Predefined user roles network - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 30
trill timer csnp to configure the CSNP interval. Use undo trill timer csnp to restore the default. Syntax trill timer csnp interval undo trill timer csnp Default The CSNP interval is 10 seconds. Views Ethernet interface view, aggregate interface view Predefined user roles network-admin Parameters - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 31
timer holding-multiplier to configure the Hello multiplier. Use undo trill timer holding-multiplier to restore the default. Syntax trill timer holding-multiplier count undo trill holding-multiplier Default The number of invalid Hello frames is 3. Views Ethernet interface view, aggregate interface - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 32
takes effect on the current interface and its member ports. Configuration on the member port of an aggregate interface takes effect after the member port leaves the aggregation group. Examples # Set the number of invalid Hello frames to 6 on FortyGigE 1/1/1. system-view [Sysname] interface - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 33
and the maximum number of LSPs transmitted per time. To prevent LSPs from being aged out accidentally, set the LSP maximum age and the LSP refresh interval appropriately. Configuration in Ethernet interface view takes effect on only the current port. Configuration in aggregate interface view - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 34
Acronyms. Websites • HP.com http://www.hp.com • HP Networking http://www.hp.com/go/networking • HP manuals http://www.hp.com/support/manuals • HP download drivers and software http://www.hp.com/support/downloads • HP software depot http://www.software.hp.com • HP Education http://www.hp.com/learn 31 - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 35
Command conventions Convention Boldface Italic [ ] { x | y | ... } [ x | y | ... ] { x | y | ... } * [ x | y | ... ] * & # Description Bold text represents commands bold text. For example, the New User window appears; click OK. Multi-level or damage to hardware or software. An alert that calls - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 36
wired-WLAN switch. Represents an access point. Represents a security product, such as a firewall, a UTM, or a load-balancing or security card that is installed in a device. Represents a security card, such as a firewall card, a load-balancing card, or a NetStream card. Port numbering in examples - HP 6125XLG | R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 37
route,16 Documents,31 G graceful-restart,16 graceful-restart interval,17 L log-peer-change enable,17 M multicast-ecmp enable,18 R reset trill,19 S Subscription service,31 T timer lsp-max-age,19 timer lsp-refresh,20 tree-root priority,21 trees calculate,21 trill,22 trill announcing-vlan,22 trill drb
HP 6125XLG Blade Switch
TRILL
Command Reference
Part number: 5998-3742
Software version: Release 2306
Document version: 6W100-20130912