HP 6125XLG R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 9
display trill lsdb, Syntax, Views, Predefined user roles, Parameters
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Table 5 Command output Field Protocol state Nickname MTU DRB Link type CSNP timer Hello timer Hello multiplier LSP timer LSP transmit-throttle count Cost AVF inhibited time Priority Active AVF Inhibited AVF Description State of TRILL: • UP. • DOWN. Nickname of the RB. MTU (in bytes) of the link. Whether the RB is elected as a DRB: • Yes-The RB is elected as a DRB. • No-The RB is not elected as a DRB. TRILL port type: • Access. • Hybrid. • Trunk. CSNP interval, in seconds. Hello interval, in seconds. Hello multiplier. Minimum LSP interval, in milliseconds. Maximum number of LSPs transmitted per time. Link cost of the port. Inhibition time, in seconds. DRB priority. VLANs for which the RB is specified as the AVF by the DRB on the port. None indicates that the RB is not specified as the AVF for any VLAN. VLANs whose AVFs are inhibited on the port. None indicates that no such VLAN exists on the port. display trill lsdb Use display trill lsdb to display TRILL link state database (LSDB) information. Syntax display trill lsdb [ local | lsp-id lsp-id | verbose ] * Views Any view Predefined user roles network-admin network-operator Parameters local: Displays information about the locally originated LSPs. 6