HP 6125XLG R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 29

Usage guidelines Configuration in Ethernet interface view takes effect on only the current port. Configuration in aggregate interface view takes effect on the current interface and its member ports. Configuration on the member port of an aggregate interface takes effect after the member port leaves the aggregation group. Examples # Configure the link type of TRILL port FortyGigE 1/1/1 as trunk. system-view [Sysname] interface fortygige 1/1/1 [Sysname-FortyGigE1/1/1] trill link-type trunk trill timer avf-inhibited Use trill timer avf-inhibited to configure the inhibition time. Use undo trill timer avf-inhibited to restore the default. Syntax trill timer avf-inhibited time undo trill timer avf-inhibited Default The inhibition time is 30 seconds. Views Ethernet interface view, aggregate interface view Predefined user roles network-admin Parameters time: Specifies the inhibition time, which is in the range of 0 to 30 seconds. Usage guidelines An RB that acts as the AVF of a VLAN guarantees that frames from the VLAN have only one incoming port or one outgoing port along a link. When other RBs receive frames from the VLAN, they do not perform any processing. However, when the RB detects that a root bridge change occurs on a link or that the AVF advertised by other RBs conflicts with the local AVF, the RB inhibits the local AVF for a certain time to avoid loops. When the inhibition time expires, if the RB is still the AVF of the VLAN, the RB restores the role of AVF. Configuration in Ethernet interface view takes effect on only the current port. Configuration in aggregate interface view takes effect on the current interface and its member ports. Configuration on the member port of an aggregate interface takes effect after the member port leaves the aggregation group. Examples # Set the inhibition time to 20 seconds on port FortyGigE 1/1/1. system-view [Sysname] interface fortygige 1/1/1 [Sysname-FortyGigE1/1/1] trill timer avf-inhibited 20 26