HP 6125XLG R2306-HP 6125XLG Blade Switch TRILL Command Reference - Page 33
Usage guidelines, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Usage guidelines To avoid frequent LSP aging in the network, RBs periodically advertise LSPs. The actual refresh interval of an LSP is determined by both the minimum LSP interval and the maximum number of LSPs transmitted per time. To prevent LSPs from being aged out accidentally, set the LSP maximum age and the LSP refresh interval appropriately. Configuration in Ethernet interface view takes effect on only the current port. Configuration in aggregate interface view takes effect on the current interface and its member ports. Configuration on the member port of an aggregate interface takes effect after the member port leaves the aggregation group. Examples # Set the minimum LSP interval to 500 milliseconds and the maximum number of LSPs transmitted per time to 10 on port FortyGigE 1/1/1. system-view [Sysname] interface fortygige 1/1/1 [Sysname-FortyGigE1/1/1] trill timer lsp 500 count 10 30