HP 8/40 Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008 - Page 250
FW-1051, FW-1052, FW-1113, FW-1114
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
30 FW-1051 FW-1051 Message , [FW-1051], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has risen above the high boundary. High voltages indicate possible hardware failures. Frequent voltage fluctuations are an indication that the SFP is deteriorating. Recommended If you see frequent voltage fluctuations, replace the SFP. Action Severity WARNING FW-1052 Message , [FW-1052], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has changed from a value outside of the acceptable range to a value within the acceptable range. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1113 Message , [FW-1113], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of times E_Ports have gone down has changed. E_Ports go down each time you remove a cable or small form-factor pluggable (SFP). SFP failures also cause E_Ports to go down. E_Port downs might be caused by transient errors. Recommended Check both ends of the physical connection and verify that the SFPs and cables are functioning Action properly. Severity INFO FW-1114 Message , [FW-1114], ,, INFO, , , is below low boundary(High=, Low=). Current value is . 198 Fabric OS Message Reference 53-1000600-02