HP 8/40 Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008 - Page 352
IPS-1005, IPS-1006
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 352 highlights
41 IPS-1005 Probable Cause Indicates that configured Port Mode is different from intended use. Recommended Change the port configuration (by deleting configured FCIP tunnels or iSCSI sessions) to return the Action port mode to neutral before attempting to configure the port for a different mode or use. Severity WARNING IPS-1005 Message , [IPS-1005], ,, WARNING, , Tunnel Authorization Failure for slot () port(ge) tunnel ID() reason () Probable Cause Indicates that tunnel setup failed due to authorization failure from the remote side. Reasons for such failures could be a WWN Mismatch. Recommended Change the tunnel configuration on one side of the tunnel to authorize remote side to setup tunnel. Action Severity WARNING IPS-1006 Message , [IPS-1006], ,, WARNING, , Tunnel Configuration Mismatch for slot () port() tunnel ID() reason () Probable Cause Indicates that tunnel setup failed due to a configuration mismatch between the two ends. Reasons for such a mismatch could be the Compression, SACK, FastWrite, and TapePipelining setting. Recommended Change the tunnel configuration on one side of the tunnel to match that of the other side to setup Action tunnel. Severity WARNING 300 Fabric OS Message Reference 53-1000600-02