HP 8/40 Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008 - Page 387
PDM-1017, Recommended, Action, firmwareDownload, supportFtp, supportSave, Severity, Message
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 387 highlights
54 PDM-1017 Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1017 Message , [PDM-1017], , FFDC, CRITICAL, , System (): . Probable Cause Indicates that the specified system call failed. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL PDM-1019 Message , [PDM-1019], ,, WARNING, , File path or trigger too long. Probable Cause Indicates that one line of the pdm.conf file is too long. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1020 Message , [PDM-1020], ,, WARNING, , Long path name (/), Skip. Probable Cause Indicates that the indicated file path name is too long. The maximum character limit is 49 characters. Recommended Use path names not exceeding 49 characters in length for the files to be replicated. Action Severity WARNING Fabric OS Message Reference 335 53-1000600-02