HP 8250 User's Guide - Page 17

(continued) Paper type How to load Tray to load 2. Slide the paper-width and paper-length guides to their outermost positions. 3. Load paper with the side to be printed facing down. Check that the stack of paper is no higher than the top of the paper- length guide. Load paper and adjust guides inward 4. Adjust the paper-width and paper-length guides inward until they stop at 1 Paper-width guide 2 Paper-length guide the edges of the paper. 5. Push in the Main tray all the way in. 6. Make sure the light on the Photo tray button is turned off to enable printing from the Main tray. Photo paper up to 10 x 15 cm (4 x 6 inch) with or without tabs, Hagaki cards, A6 cards, L-size cards Push in the Main tray 1 Push the Main tray all the way in 1. Remove the Output tray. Load the Photo tray 2. Adjust the paper-width and paper-length guides outward to make room for the paper. 3. Load up to 20 sheets of paper into the Photo tray with the side to be printed facing down. If you are using tabbed paper, insert the paper so the tab feeds in last. Remove Output tray and adjust 4. Adjust the paper-width guides outward and paper-length guides inward until they stop at the edges of the paper. 5. Replace the Output tray. 1 Output tray 2 Paper-width guide 3 Paper-length guide 6. Make sure the light on the Photo tray button is turned on to enable printing from the Photo tray. HP Photosmart 8200 series User's Guide 13