HP 9000 rp7410 nPartition Administrator's Guide, Second Edition - Page 248

• The -u... -h... set of options may be specified to cause the command to send its management request using WBEM to an nPartition other than the local nPartition (but can also be used as a "loopback access" to the local nPartition). NOTE: When specifying the -u... -h... options, the host specified by -h must be have the Enhanced nPartition Commands installed and have WBEM configured. Also, the client.pem file on the system from which the command is issued must have a copy of the SSL certificate entry (including the BEGIN and END lines) from specified host's server.pem file. See "Remote Management Using WBEM" (page 44) for details. • The -g... -h... options may be specified to cause the command to send its management request using IPMI over LAN to a service processor in another server complex (but can also be used as a "loopback access" to the service processor in the local complex). NOTE: When specifying the -g... -h... options, the host specified by -h must have IPMI LAN access enabled. Also, the user who issues the command must correctly specify the host's IPMI password in order for the command to be able to successfully complete. See "Remote Management Using IPMI over LAN" (page 46) for details. The -u and -g options are mutually exclusive. For more details about remote management, see "Remote and Local Management of nPartitions" (page 41). 248 nPartition Commands