HP BladeSystem bc2000 Command Line Interface Reference Guide HP BladeSystem PC - Page 123
speed, speed {10 | 100 | 1000}, no speed
View all HP BladeSystem bc2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Ethernet Configuration Commands speed The speed Interface Configuration (Ethernet, port-channel) mode command configures the speed of a given Ethernet interface when not using auto-negotiation. To restore the default configuration, use the no form of this command. Syntax speed {10 | 100 | 1000} no speed Parameters n 10 - Forces10 Mbps operation. n 100 - Forces 100 Mbps operation. n 1000 - Forces 1000 Mbps operation. Default Setting Maximum port capability Command Mode Interface Configuration (Ethernet, port-channel) mode Command Usage The no speed command in a port-channel context returns each port in the port-channel to its maximum capability. Example The following command configures the speed operation of Ethernet port e45 to 100 Mbps operation. Console(config)# interface ethernet e45 Console(config-if)# speed 100 HP PC Blade Switch CLI Reference Guide www.hp.com 8-5