HP BladeSystem bc2000 Command Line Interface Reference Guide HP BladeSystem PC - Page 308
spanning-tree pathcost method, spanning-tree pathcost method {long | short}, spanning-tree cost
View all HP BladeSystem bc2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
Spanning-Tree Commands spanning-tree pathcost method The spanning-tree pathcost method Global Configuration mode command sets the default path cost method. To return to the default configuration, use the no form of this command. Syntax spanning-tree pathcost method {long | short} no spanning-tree pathcost method Parameters n long - Specifies port path costs with a range of 1-200,000,000. n short - Specifies port path costs with a range of 0-65,535. Default Setting Short path cost method. Command Mode Global Configuration mode Command Usage This command applies to all spanning tree instances on the device. The cost is set using the spanning-tree cost command. Example The following command sets the default path cost method to long. Console(config)# spanning-tree pathcost method long 22-12 www.hp.com HP PC Blade Switch CLI Reference Guide