HP BladeSystem bc2000 Command Line Interface Reference Guide HP BladeSystem PC - Page 82
show bridge address-table
View all HP BladeSystem bc2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Address Table Commands show bridge address-table The show bridge address-table Privileged EXEC mode command displays all entries in the bridge-forwarding database. Syntax show bridge address-table [vlan vlan] [ethernet interface | port-channel port-channel-number] Parameters n vlan - Specifies a valid VLAN, such as VLAN 1. n interface - A valid Ethernet port. n port-channel-number - A valid port-channel number. Default Setting This command has no default configuration. Command Mode Privileged EXEC mode Command Usage Internal usage VLANs (VLANs that are automatically allocated on ports with a defined Layer 3 interface) are presented in the VLAN column by a port number and not by a VLAN ID. "Special" MAC addresses that were not statically defined or dynamically learned are displayed in the MAC address table. This includes, for example, MAC addresses defined in ACLs. Example The following command displays all classes of entries in the bridge-forwarding database. Console# show bridge address-table Aging time is 300 sec Interface --------1 1 200 MAC Address Port ---- 00:60:70:4C:73:F e8 F 00:60:70:8C:73:F e8 F 00:10:0D:48:37:F e9 F Type ------dynamic dynamic static 5-14 www.hp.com HP PC Blade Switch CLI Reference Guide