HP BladeSystem bc2000 Command Line Interface Reference Guide HP BladeSystem PC - Page 155
nip igmp snooping host-time-out
View all HP BladeSystem bc2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
IGMP Snooping Commands nip igmp snooping host-time-out The ip igmp snooping host-time-out Interface Configuration (VLAN) mode command configures the host-time-out. If an IGMP report for a multicast group was not received for a host-time-out period from a specific port, this port is deleted from the member list of that multicast group. To return to the default configuration, use the no form of this command. Syntax ip igmp snooping host-time-out time-out no ip igmp snooping host-time-out Parameters n time-out - Host timeout in seconds. (Range: 1-2147483647) Default Setting The default host-time-out is 260 seconds. Command Mode Interface Configuration (VLAN) mode Command Usage The timeout should be at least greater than 2*query_interval+max_response_time of the IGMP router. Example In the following example, the host timeout is configured to 300 seconds. Console(config)# interface vlan 2 Console(config-if)# ip igmp snooping host-time-out 300 HP PC Blade Switch CLI Reference Guide www.hp.com 10-3