HP BladeSystem bc2000 Command Line Interface Reference Guide HP BladeSystem PC - Page 138
port storm-control include-multicast (IC), port storm-control broadcast enable
View all HP BladeSystem bc2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Ethernet Configuration Commands port storm-control include-multicast (IC) The port storm-control include-multicast Interface Configuration (Ethernet) mode command counts multicast packets in broadcast storm control. To disable counting multicast packets, use the no form of this command. Syntax port storm-control include-multicast [unknown-unicast] no port storm-control include-multicast Parameters n unknown-unicast - Specifies also counting unknown unicast packets. Default Setting Multicast packets are not counted. Command Mode Interface Configuration (Ethernet) mode Command Usage To control multicasts storms, use the port storm-control broadcast enable and port storm-control broadcast rate commands. Example The following command enables counting broadcast and multicast packets on Ethernet port e42. Console(config)# interface ethernet e42 Console(config-if)# port storm-control include-multicast 8-20 www.hp.com HP PC Blade Switch CLI Reference Guide