HP Brocade 8/12c Fabric OS Troubleshooting and Diagnostics Guide v6.4.0 (53-10 - Page 99
Working With Diagnostic Features, In this About Fabric OS diagnostics, Diagnostic information
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Chapter Working With Diagnostic Features 10 In this chapter •About Fabric OS diagnostics 85 •Diagnostic information 85 •Power-on self test 86 •Switch status 88 •SpinFab and portTest 90 •Port information 94 •Equipment status 97 •System message log 99 •Port log 100 •Syslogd configuration 102 •Automatic trace dump transfers 103 About Fabric OS diagnostics The purpose of the diagnostic subsystem is to evaluate the integrity of the system hardware. Diagnostics are invoked in the one of the following ways: • Automatically during the power-on self test (POST). • Automatically on an individual blade whenever it is installed into a director chassis. • Manually using Fabric OS CLI commands. The error messages generated during these test activities are sent to the serial console and system message logs, whose output formats may differ slightly. Use the diagHelp command to receive a list of all available diagnostic commands. See the Fabric OS Command Reference for a complete description of each command. Diagnostic information On the switch you can enter the supportShow command to dump important diagnostic and status information to the session screen, where you can review it or capture its data. If you are using a Telnet client, you may have to set up the client to capture the data prior to opening the session Most information can be captured using the supportSave command and FTP'd off the switch, but when you are collecting information from specialized commands, such as supportShow, this information has to be captured using a Telnet client. Fabric OS Troubleshooting and Diagnostics Guide 85 53-1001769-01