HP Brocade 8/12c Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 ( - Page 153

sw traps 6 TABLE 15 SW-MIB traps Trap name Commands to configure "swFault" on page 134 N.A. (not supported) "swSensorScn" on page 134 N.A. "swFCPortScn" on page 134 "swEventTrap" on page 135 Always on For more information, refer to the snmpConfig command in the Fabric OS Command Reference. "swFabricWatchTrap" on page 135 Fabric OS Command: portthconfig, thconfig, sysmonitor --config "swTrackChangesTrap" on page 136 "swIPv6ChangeTrap" on page 136 Fabric OS Command: trackChangesSet and trackChangesShow For more information, refer to the snmpConfig command in the Fabric OS Command Reference. "swPmgrEventTrap" on page 136 "swFabricReconfigTrap" on page 136 "swFabricSegmentTrap" on page 137 "swExtTrap" on page 137 "swStateChangeTrap" on page 137 "swPortMoveTrap" on page 137 "swBrcdGenericTrap" on page 137 The swSsn variable is optional in trap messages. The swGroupName, swGroupType, and swGroupMemPos variables are optional trap messages in v2.6.x. The swGroupName, swGroupType, and swGroupMemPos variables are not supported in Fabric OS v4.x and later versions. Because Fabric OS releases prior to v5.2.0 used to show the Enterprise Field in the swTraps from the sysObjectID (set using config variable "snmp.sysObjectID"), the Enterprise field will not always be resolved to "sw." If the sysObjectID is changed by user the Enterprise field in the trap will show some unresolved value. To resolve this issue, beginning with the v5.2.0 release, the SNMP configuration variable snmp.trapEnterpriseFlag lets you define the way that the Enterprise field displays. Select either the previous behavior in which the Enterprise field is taken from sysObjectID or the new behavior in which the value in the Enterprise field will always be "sw": • Set the value of this variable to 0, to use the sysObjectID. • Set the value to 1 to use the fixed enterprise value, "sw" (1.3.6.1.4.1.1588.2.1.1.1.). Fabric OS MIB Reference 133 53-1002151-01