HP Brocade 8/12c Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 ( - Page 99

fcFeStatus group 4 fcFeStatus group This group consists of tables that contain operational status and established service parameters for the fabric element and the attached Nx_Ports. Object and OID Access Description fcFxPortStatusTable 1.3.6.1.2.1.75.1.2.1 fcFxPortStatusEntry 1.3.6.1.2.1.75.1.2.1.1 fcFxPortID 1.3.6.1.2.1.75.1.2.1.1.1 Not accessible Not accessible Read only fcFxPortBbCreditAvailable Read only 1.3.6.1.2.1.75.1.2.1.1.2 fcFxPortOperMode Read only 1.3.6.1.2.1.75.1.2.1.1.3 fcFxPortAdminMode Read only 1.3.6.1.2.1.75.1.2.1.1.4 fcFxPortPhysTable 1.3.6.1.2.1.75.1.2.2 Not accessible fcFxPortPhysEntry 1.3.6.1.2.1.75.1.2.2.1 Not accessible fcFxPortPhysAdminStatus Read only 1.3.6.1.2.1.75.1.2.2.1.1 A table that contains operational status and parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element. An entry containing operational status and parameters of an Fx_Port. The address identifier by which this Fx_Port is identified within the fabric. The Fx_Port might assign its address identifier to its attached Nx_Ports during fabric login. The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit. NOTE: This object is not supported on the FC10-6 port blade. The current operational mode of the Fx_Port. Valid values: • unknown (1) • fPort (2) • flPort (3) The desired operational mode of the Fx_Port. A table that contains the physical level status and parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element. An entry containing physical level status and parameters of an Fx_Port. The desired state of the Fx_Port. A management station might place the Fx_Port in a desired state by setting this object accordingly. Valid values: • online (1) • offline (2) • testing (3) The testing state (3) indicates that no operational frames can be passed. When a fabric element initializes, all Fx_Ports start with fcFxPortPhysAdminStatus in the offline state (2). As the result of either explicit management action or per configuration information accessible by the fabric element, fcFxPortPhysAdminStatus is then changed to either the online (1) or testing (3) states or remains in the offline state (2). Fabric OS MIB Reference 79 53-1002151-01