HP Brocade 8/12c Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 ( - Page 228

9 Connectivity unit group Object and OID Access Description connUnitSensorMessage Read only This describes the status of the sensor as a message. It may also 1.3.6.1.3.94.1.8.1.6 provide some information about the sensor, for example: sensor 1: type 3 is OK, value is 33 connUnitSensorType 1.3.6.1.3.94.1.8.1.7 Read only Each contains the sensor status (and reading if applicable) in textual format. The type of component being monitored by this sensor. Possible values are: • unknown (1) • other (2) • battery (3) • fan (4) • power-supply (5) • transmitter (6) • enclosure (7) • board (8) • receiver (9) The following mapping is for each individual sensor, where applicable: connUnitSensorCharacte Read only ristic 1.3.6.1.3.94.1.8.1.8 connUnitPortTable 1.3.6.1.3.94.1.10 Not accessible connUnitPortEntry 1.3.6.1.3.94.1.10.1 connUnitPortUnitId 1.3.6.1.3.94.1.10.1.1 Not accessible Read only swSensorType 1 (temperature) 2 (fan) 3 (power supply) connUnitSensorType 8 (board) 4 (fan) 5 (power supply) The characteristics being monitored by this sensor. The following mapping is for each individual sensor, where applicable: swSensorType connUnitSensorCharacteristic 1 (temperature) 3 (temperature) 2 (fan) 7 (airflow) 3 (power supply) 9 (power) Possible values are: • unknown (1) • other (2) • temperature (3) • pressure (4) • emf (5) • currentValue (6) Current is a keyword. • airflow (7) • frequency (8) • power (9) • door (10) - Not supported in Fabric OS v2.6.1. Generic information on ports for a specific connUnit NOTE: Information about the GbE ports on a Brocade 7500 or FR4-18i blade is not supported. Each entry contains the information for a specific port. The connUnitId value of the connectivity unit that contains this port. Same value as connUnitId. 208 Fabric OS MIB Reference 53-1002151-01