HP Brocade 8/12c Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 ( - Page 39

Access Gateway and Brocade MIBs 1 To set the security level to default: DCX_128:FID128:admin> snmpconfig --default seclevel GET security level = 0, SET level = 0 SNMP GET Security Level: No security SNMP SET Security Level: No security SNMP GET Security Level will be set to 'No Security' SNMP SET Security Level will be set to 'No Security' Do you want to continue? (yes, y, no, n): [no] y DCX_128:FID128:admin> DCX_128:FID128:admin> snmpconfig --show seclevel GET security level = 0, SET level = 0 SNMP GET Security Level: No security SNMP SET Security Level: No security DCX_128:FID128:admin 4. In the Manager (SNMP Browser), create a user snmpadmin1 with Authentication protocol as noAuth, Privacy protocol as noPriv, set the password and set the trap port as 162. (Same values are set as in the switch SNMPv3 configuration.) NOTE SNMPv3 supports AES128, DES, and 3DES protocols. SNMPv3 does not support privacy protocols AES192 and AES256. Access Gateway and Brocade MIBs Table 3 shows the MIBs supported by Brocade Access Gateway. .TABLE 3 MIB name Access Gateway MIB support Supported Description MIB-2 Entity-MIB HA-MIB SW-MIB FA-MIB FE-MIB CPQ-Rack MIB FCIP MIB Yes Yes Yes No Yes No Limited No Updated to support Access Gateway in v5.2.1. Supported in Access Gateway. Supported in Access Gateway. Disabled in Access Gateway because the conventions are specific to fabric switches. In Fabric OS v6.4.0, swConnUnitPortExtensionTable is supported in Access Gateway mode. In Fabric OS v7.0.0, SNMP allows you to access the following tables to support the Advanced Performance Monitoring feature on Access Gateway, even if the SW-MIB is disabled: • "swBlmPerfEEMntTable" • "swBlmPerfFltMntTable" The connUnitSnsTable is not supported because a switch in Access Gateway does support name server services. Disabled in Access Gateway because the conventions are specific to fabric switches. Supported on embedded switches only. Disabled in Access Gateway because the conventions are specific to fabric switches. Fabric OS MIB Reference 19 53-1002151-01