HP Brocade 8/12c Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 ( - Page 169

Fibre Channel port group 6 Object and OID Access Description swAgtTrapRcp Read-write 1.3.6.1.4.1.1588.2.1.1.1 .4.11.1.3 swAgtTrapSeverityLevel Read-write 1.3.6.1.4.1.1588.2.1.1.1 .4.11.1.4 This is the trap recipient associated with the community. If a new value is set successfully, it takes effect immediately. If not otherwise set, the default IP address for this trap recipient is 0.0.0.0 and the SNMP trap is not sent for the associated community string. With a setting of non-0.0.0.0 IP address, SNMP traps are sent to the host with the associated community string. Any or all of the trap recipients can be configured to send a trap for the associated community string. The maximum number of trap recipients that can be configured is six. If no trap recipient is configured, no traps are sent. The trap recipient IP address should be part of the Access Control List for Fabric OS v2.6.1, v3.1, and v4.x (refer to the Fabric OS Command Reference and the snmpConfig command for more information). This is the trap severity level associated with "swAgtTrapRcp". The trap severity level, is in conjunction with the event's severity level. When an event occurs, and if its severity level is at or below the set value, the SNMP trap is sent to configure trap recipients. The severity level is limited to particular events. If a new value is set successfully, it takes effect immediately. This object obsoletes "swEventTrapLevel". Fibre Channel port group This group contains information about the physical state, operational status, performance, and error statistics of each Fibre Channel port on the switch. A Fibre Channel port is one which supports the Fibre Channel protocol, such as F_Port, E_Port, U_Port, or FL_Port. Fabric OS MIB Reference 149 53-1002151-01