HP Brocade 8/12c Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 ( - Page 173

Fibre Channel port group 6 Object and OID Access Description swFCPortRxEncOutFrs 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.26 Read only Counts the number of encoding error or disparity error outside frames received. swFCPortRxBadOs 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.27 Read only Counts the number of invalid ordered sets received. swFCPortC3Discards 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.28 Read only Counts the number of Class 3 frames that the port has discarded. swFCPortMcastTimedOuts Read only Counts the number of multicast frames that have been timed out. 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.29 swFCPortTxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.30 Read only Counts the number of multicast frames that have been transmitted. swFCPortLipIns 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.31 Read only Counts the number of loop initializations that have been initiated by loop devices attached. swFCPortLipOuts Read only Counts the number of loop initializations that have been initiated by 1.3.6.1.4.1.1588.2.1.1.1.6.2 the port. .1.32 swFCPortLipLastAlpa 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.33 Read only Indicates the physical address (AL_PA) of the loop device that initiated the last loop initialization. swFCPortWwn 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.34 Read only The WWN of the Fibre Channel port. The contents of an instance are in IEEE extended format, as specified in FC-PH. swFCPortSpeed 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.35 Read-write The desired baud rate for the port. The baud rate can be 1 Gbps, 2 Gbps, autonegotiate, or 4 Gbps or 8 Gbps. 4 Gbps is only applicable to the Brocade 4100, 4900, 7500, 7600, and 48000. 8 Gbps is only applicable to the Brocade DCX director. swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.36 Read only Supported in Fabric OS v4.1.x and later. A string that indicates the name of the addressed port. NOTE: The names should be persistent across switch reboots. Port names do not have to be unique within a switch or within a fabric. swFCPortSpecifier 1.3.6.1.4.1.1588.2.1.1.1.6.2 .1.37 Read only This string indicates the physical port number of the addressed port. This string can be entered as argument on CLI commands such as portShow or wherever a physical port number is expected. The format of the string is: port, 'slot' being present only for bladed systems. For directors, such as Brocade 48000: swFCPortSpecifier.64 = 4/15 For non-bladed systems, such as Brocade 4100: swFCPortSpecifier.31 = 30 For LISL, the value is -1/. Fabric OS MIB Reference 153 53-1002151-01