HP Brocade 8/12c Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 ( - Page 185

End device group 6 NOTE The FCU port is supported on the following platforms only: Brocade 3016 Brocade 3014 Brocade 4012 Brocade 4020 Brocade 4016 Brocade 4024 Brocade 4018 Brocade 4424 Brocade 5440 Brocade 5450 Brocade 5460 Brocade 5410 Brocade 5480 Brocade 5470 End device group Object and OID Access Description swEndDevice 1.3.6.1.4.1.1588.2.1.1.1.21 Not The OID sub-tree for end device group. accessible swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1 Not The table of RLS for individual end devices. accessible swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1 Not accessible An entry of an individual end devices' RLS. Since Brocade switches start with port # 0, the SNMP port # should be physical port # plus 1. In turn, that means that SNMP port # 3 translates to port # 2. swEndDevicePort Not This object represents the port of the local switch to which the 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1 accessible end device is connected. This is an obsolete entry and does not show any value. swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2 Not accessible This object represents the AL_PA of the end device. SNMP AL_PA number should be the logical AL_PA number plus 1. For example, SNMP AL_PA number 0xf0 translates to 0xef. This is an obsolete entry and does not show any value. swEndDevicePortID Read only The Fibre Channel port address ID of the entry. 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3 swEndDeviceLinkFailure Read only Link failure count for the end device. 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4 swEndDeviceSyncLoss Read only Sync loss count for the end device. 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5 swEndDeviceSigLoss Read only Signal loss count for the end device. 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6 swEndDeviceProtoErr Read only Protocol error count for the end device. 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.7 Fabric OS MIB Reference 165 53-1002151-01