HP Brocade 8/12c Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 ( - Page 223

Connectivity unit group 9 Object and OID connUnitNumports 1.3.6.1.3.94.1.6.1.4 connUnitState 1.3.6.1.3.94.1.6.1.5 connUnitStatus 1.3.6.1.3.94.1.6.1.6 connUnitProduct 1.3.6.1.3.94.1.6.1.7 connUnitSn 1.3.6.1.3.94.1.6.1.8 Access Read only Read only Read only Read only Read only Description Number of physical ports (between 0 and the maximum number of system supported ports) in the connectivity unit (external). The Brocade switches support 0 to maximum number of system supported ports. NOTE: The ConnUnitNumports will not count the GE ports present on the FC4-16IP blade. The maximum number of supported ports are as follows. Brocade 300 24 ports Brocade 4100 Brocade 4900 Brocade 5000 Brocade 5100 32 ports 64 ports 32 ports 40 ports Brocade 5300 80 ports Brocade 7500 or 7500E Brocade 7600 Brocade 7800 Extension Switch Brocade 8000 Brocade Encryption Switch 32 ports 16 ports 24 ports 32 ports 32 ports Brocade DCX 640 ports Brocade DCX-4S Brocade 48000 Brocade 6510 320 ports 384 ports 48 ports Brocade DCX 8510-4 Backbone 320 ports Brocade DCX 8510-8 Backbone 640 ports Overall state of the connectivity unit. Possible values are: • unknown (1) • online (2) - Set the state to online. • offline (3) - Set the state to offline. Mapped as follows: switchState (ONLINE) 2 (online) switchState (not ONLINE) 3 (offline, testing, faulty) Overall status of the connectivity unit. This switch status is based on the most severe status of contributors like Power supplies, Temperatures, Fans, WWN servers, Standby CP, Blades, Flash, Marginal ports, Faulty ports, Missing SFPs, and so on. switchStatusPolicyShow command displays the policy parameters that determines the overall switch status. Possible values are: • unknown (1) - Unknown • unused (2) - Unmonitored • ok (3) - Healthy/ok • warning (4) - Marginal/Warning • failed (5) - Down/Failed The connectivity unit vendor's product model name. This is the same as for sysDescr (set for as many as 79 bytes). If the switch is in Access Gateway mode, the default value is Access Gateway. The serial number for this connectivity unit. Set to the SSN (which by default is the WWN). Fabric OS MIB Reference 203 53-1002151-01