HP Brocade 8/12c Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 ( - Page 97

fcFeConfig group 4 Object and OID Access Description fcFeModuleFxPortCapacity Read only 1.3.6.1.2.1.75.1.1.4.1.6 fcFeModuleName 1.3.6.1.2.1.75.1.1.4.1.7 fcFxPortTable 1.3.6.1.2.1.75.1.1.5 fcFxPortEntry 1.3.6.1.2.1.75.1.1.5.1 Read-write Not accessible Not accessible The number of Fx_Ports that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity, inclusive. However, the numbers are not required to be contiguous. Valid values: • Brocade 300 • Brocade 4100 • Brocade 4900 • Brocade 5000 • Brocade 5100 • Brocade 5300 • Brocade 7500 or 7500E • Brocade 7600 • Brocade 7800 Extension Switch • Brocade 8000 • Brocade Encryption Switch • Brocade DCX • Brocade DCX-4S • Brocade 48000 • Brocade 6510 • Brocade DCX 8510-4 Backbone • Brocade DCX 8510-8 Backbone 24 ports 32 ports 64 ports 32 ports 40 ports 80 ports 32 ports 16 ports 24 ports 32 ports 32 ports 640 ports 320 ports 384 ports 48 ports 320 ports 640 ports The Name_Identifier of the module. This object returns the WWN of the switch. A table that contains configuration and service parameters of the Fx_Ports, one entry for each Fx_Port in the fabric element. An entry containing the configuration and service parameters of an Fx_Port. fcFxPortIndex 1.3.6.1.2.1.75.1.1.5.1.1 fcFxPortName 1.3.6.1.2.1.75.1.1.5.1.2 fcFxPortFcphVersionHigh 1.3.6.1.2.1.75.1.1.5.1.3 fcFxPortFcphVersionLow 1.3.6.1.2.1.75.1.1.5.1.4 fcFxPortBbCredit 1.3.6.1.2.1.75.1.1.5.1.5 fcFxPortRxBufSize 1.3.6.1.2.1.75.1.1.5.1.6 Not accessible Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is re-initialized. Read only The World Wide Name of this Fx_Port. Each Fx_Port has a unique port World Wide Name within the fabric. This object returns the WWN of the port. Read only The highest or most recent version of FC-PH that the Fx_Port is configured to support. This value is always 32. Read only The lowest or earliest version of FC-PH that the Fx_Port is configured to support. This value is always six. Read only The total number of receive buffers available for holding Class 1 connect-request, and Class 2 or 3 frames from the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from the attached Nx_Port (if applicable) to Fx_Port. Read only The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the Fx_Port. Fabric OS MIB Reference 77 53-1002151-01