HP Contura 400 Compaq Contura 400 Family of Personal Computers Maintenance and - Page 286
The PC Card slot is, From MS-DOS: Run the PCCARD
View all HP Contura 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
When turned on, the computer does not beep when a PC Card is inserted. Card is not inserted Remove and reinsert the properly. card in the correct orientation. PC Card beeps are From MS-DOS: Run the PCCARD disabled. utility to re-enable PC Card beeps. From Windows: Select Computer Setup from the Compaq Control Center and select the PC Card option to re-enable PC Card beeps. Warning beeps are Press Fn+F5 keys to turn on turned off. warning beeps. PC Card drivers are Select Computer Setup from not loaded. the Compaq Control Center and select the PC Card option to enable the PC Card drivers. The PC Card slot is From MS-DOS: Select disabled. Security Management from the Configuration and Diagnostics menu to enable the PC Card slot. Card or card driver is not PC Card compliant. From Windows: Select Security Management from the Compaq Control Center to enable the PC Card slot. Contact Compaq Reseller Support for a list of PC Cards tested successfully in Compaq PC Card platforms. The PC Card drivers The PC Card slot is From MS-DOS: Select (Socket Services, disabled. Security Management from Card Services, Card the Configuration and ID) fail with error Diagnostics menu to messages when the enable the PC Card slot. computer is turned on. From Windows: Select Security Management from the Compaq Control Center to enable the PC Card slot. Problem Probable Cause Solution(s) PC Card modem or Wrong COM port From MS-DOS: Run CARDINFO fax card does not being used to access to determine which COM port work. the card. is assigned to the card. From Windows: Select Computer Setup from the Compaq Control Center to