HP Contura 400 Compaq Contura 400 Family of Personal Computers Maintenance and - Page 287

determine which COM port is assigned to the card. The card conflicts From MS-DOS: Run PCCARD to with the system board select a different COM serial device. port for the PC Card. From Windows: Select Computer Setup from the Compaq Control Center, then select the PC Card option and choose a different COM port for the PC Card. The card is not PC Contact Compaq Reseller Card compliant. Support for a list of PC Cards tested successfully in Compaq PC Card platforms. Modem or network PC Network driver is not Select Computer Setup Card does not work. set up properly. from the Compaq Control Center and select the PC Card option; then view the Online help for detailed instructions on setting up network PC Cards. Storage PC Card does SRAM and flash Select Computer Setup from not work. memory cards require the Compaq Control Center; the memory card then select the PC Card driver to be loaded. option to enable the memory card driver. Flash memory cards Select Computer Setup from require the Microsoft the Compaq Control Center; FlashFile System to then select the PC Card be loaded. option to enable the flash file system. Hard disks on flash Select Computer Setup from mass storage cards the Compaq Control Center; require the PC Card then select the PC Card ATA driver to be option to enable the PC loaded. Card ATA driver. Problem Probable Cause Solution(s) You are trying to From MS-DOS: Run CARDINFO access the card using to determine which drive the wrong drive letter is assigned to the letter. card. From Windows: Select Computer Setup from the Compaq Control Center to see which drive letter is assigned to the card.