HP D2D HP StorageWorks HP D2D Backup System rack models service and maintenanc - Page 10
Using the ProLiant Guide with HP D2D4112 G1 models
![]() |
View all HP D2D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Figure 4 Rear view of the HP D2D2502/2504 G2 1. Power supply cable socket 2. LAN port 1 (always used for data connection) 3. LAN port 2 4. iLO2 Management port (Do not use for data) 5. PCIe slots (one full and one low profile) 6. VGA port for system console monitor 7. USB ports for system console keyboard and mouse Using the ProLiant Guide with HP D2D4112 G1 models When using the HP ProLiant DL185 G5 guide, be aware of the following HP D2D-specific information: • The system components are illustrated in the 12HDD server diagram and the Opteron 2384, part number 495643-005, is the only processor that is supported. • The HP D2D has 12 removable hard disks. The 12th disk is an online spare disk. If one of the other disks fails, the online spare disk immediately takes its place. • There is no optical media storage. • The configuration of the system memory is 16 GB (8 x 2 GB DIMMs). The part number for each 2 GB DIMM is 499276-061. • The HP D2D is supplied with an HP Smart Array P800 controller (with 512 MB and two BBWCs) pre-installed in one of the full-height PCI-e slots. For more information about this card, search on http://www.hp.com/support/manuals. Part numbers are as follows: ◦ P800 card: 398647-001 ◦ 512 MB memory: 398645-001 ◦ BBWC: 398648-001 • The system has an HP StorageWorks Dual Channel 4Gb PCIe Fibre Channel Host Bus Adapter, part number AE312A 10 Introduction
![](/manual_guide/products/hewlettpackard-d2d-hp-storageworks-hp-d2d-backup-rack-models-service-maintenance-guide-eh98590937-2011-0f7cf61/10.png)