HP D2D HP StorageWorks HP D2D Backup System rack models service and maintenanc - Page 8

Using the ProLiant Guide with HP D2D4106/4112 G2 models - raid configuration

Get HP D2D PDF manuals and user guides View all HP D2D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

cache module and BBWC). The P411 cards are installed in PCI-e Slots 5 and 6. Part numbers for the P411 card are as follows: ◦ HP Smart Array P411/512 MB with BBWC Controller: 462832-B21 ◦ 512 MB memory: 462975-001 ◦ BBWC: 462976-001 For more information about the HP Smart Array cards, search on http://www.hp.com/support/ manuals. • The configuration of the system memory is 96 GB (12 x 8 GB DIMMs, 6 per processor). The part number for each 8 GB DIMM is 500662-B21. • The system has an HP StorageWorks 8Gb Dual Channel PCI-e to Fibre Channel Host Bus Adapter, part number AJ764A. • The system has an HP NC550SFP Dual Port 10GbE Server Adapter, part number 581201-B21. • The system has an HP SAS Expander Card, part number 468406-B21, in PCI-e Slot 1. Figure 2 Rear view of the HP D2D4312 1. Power supplies (two) 2. iLO2 Management port (do not use for data) 3. LAN ports 3 (required connection) and 4 4. 10-Gb Ethernet card with two ports 5. Fibre Channel card 6. RAID cards 7. HP SAS expander card Using the ProLiant Guide with HP D2D4106/4112 G2 models When using the HP ProLiant DL180se G6 guide, be aware of the following HP D2D-specific information: • The CPU is Intel Xeon X5550 (Spare P/N 490070-001) - there are two per system • The HP D2D has 12 removable hard disks. The 12th disk is an online spare disk. If one of the other disks fails, the online spare disk immediately takes its place. (The HP D2D4106 has 12 x 500 GB hard disks; the HP D2D4112 has 12 x 1 TB hard disks.) • The configuration of the system memory is 72 GB (9 x 8 GB DIMMs; 5 for the first processor, 4 for the second). The part number for each 8 GB DIMM is 500662-B21. • The HP D2D is supplied with an HP Smart Array P212/Zero Memory Controller (with 512 MB and BBWC) pre-installed in one of the full-height PCI-e slots. For more information about this card, search on http://www.hp.com/support/manuals. Part numbers are as follows: ◦ HP Smart Array P212/Zero Memory Controller: 462828-B21 ◦ 512MB BBWC -Cache and BBWC: 462967-B21 8 Introduction

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
cache module and BBWC). The P411 cards are installed in PCI-e Slots 5 and 6. Part numbers
for the P411 card are as follows:
◦
HP Smart Array P411/512 MB with BBWC Controller: 462832-B21
◦
512 MB memory: 462975-001
◦
BBWC: 462976-001
For more information about the HP Smart Array cards, search on
h
t
tp://w
w
w
.hp
.co
m/su
ppo
r
t/
man
uals
.
•
The configuration of the system memory is 96 GB (12 x 8 GB DIMMs, 6 per processor). The
part number for each 8 GB DIMM is 500662-B21.
•
The system has an HP StorageWorks 8Gb Dual Channel PCI-e to Fibre Channel Host Bus
Adapter, part number AJ764A.
•
The system has an HP NC550SFP Dual Port 10GbE Server Adapter, part number 581201-B21.
•
The system has an HP SAS Expander Card, part number 468406-B21, in PCI-e Slot 1.
Figure 2 Rear view of the HP D2D4312
5. Fibre Channel card
1. Power supplies (two)
6. RAID cards
2. iLO2 Management port (do not use for data)
7. HP SAS expander card
3. LAN ports 3 (required connection) and 4
4. 10–Gb Ethernet card with two ports
Using the ProLiant Guide with HP D2D4106/4112 G2 models
When using the HP ProLiant DL180se G6 guide, be aware of the following HP D2D-specific
information:
•
The CPU is Intel Xeon X5550 (Spare P/N 490070-001) – there are two per system
•
The HP D2D has 12 removable hard disks. The 12th disk is an online spare disk. If one of
the other disks fails, the online spare disk immediately takes its place. (The HP D2D4106 has
12 x 500 GB hard disks; the HP D2D4112 has 12 x 1 TB hard disks.)
•
The configuration of the system memory is 72 GB (9 x 8 GB DIMMs; 5 for the first processor,
4 for the second). The part number for each 8 GB DIMM is 500662-B21.
•
The HP D2D is supplied with an HP Smart Array P212/Zero Memory Controller (with 512
MB and BBWC) pre-installed in one of the full-height PCI-e slots. For more information about
this card, search on
h
t
tp://w
w
w
.hp
.co
m/su
ppo
r
t/man
uals
. Part numbers are as follows:
◦
HP Smart Array P212/Zero Memory Controller: 462828-B21
◦
512MB BBWC -Cache and BBWC: 462967-B21
8
Introduction