HP D2D HP StorageWorks HP D2D Backup System rack models service and maintenanc - Page 18

IMPORTANT, HP D2D 4112, HP D2D4004 or HP D2D4009 G1 flash memory module, HP

Page 18 highlights

4. Be sure to update the HP D2D software to the latest version. This is done from the Web Management Interface (Settings/Software page), as described in the HP StorageWorks D2D Backup System User Guide. IMPORTANT: If your replacement flash stick is at a lower revision than the one it replaces, you may experience a message of "Devices Starting" or "Initialising". This message will also occur, if the D2D Backup System did not shutdown correctly. In this case, please wait a minimum of 12 hours before updating software. Figure 11 HP D2D 4112, HP D2D4004 or HP D2D4009 G1 flash memory module Figure 12 HP D2D2500 G1 Series flash memory module 1 cable and USB connector to the memory module 2 screw and bracket securing USB cable connector 3 cable and connector to the motherboard 4 flash memory module 18 The flash memory module

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

4.
Be sure to update the HP D2D software to the latest version. This is done from the Web
Management Interface (Settings/Software page), as described in the HP StorageWorks D2D
Backup System User Guide.
IMPORTANT:
If your replacement flash stick is at a lower revision than the one it replaces,
you may experience a message of “Devices Starting” or “Initialising". This message will also
occur, if the D2D Backup System did not shutdown correctly. In this case, please wait a
minimum of 12 hours before updating software.
Figure 11 HP D2D 4112, HP D2D4004 or HP D2D4009 G1 flash memory module
Figure 12 HP D2D2500 G1 Series flash memory module
cable and USB connector to the memory module
1
screw and bracket securing USB cable connector
2
cable and connector to the motherboard
3
flash memory module
4
18
The flash memory module