HP D2D HP StorageWorks HP D2D Backup System rack models service and maintenanc - Page 9

◦ 512 MB memory: 462975-001 ◦ BBWC: 462976-001 • The system has an HP StorageWorks Dual Channel 4Gb PCIe Fibre Channel Host Bus Adapter, part number AE312A, which is installed in a full-height slot Figure 3 Rear view of the HP D2D4106/4112 G2 1. Power supply cable sockets (two) 2. LAN port 1 (always used for data connection) 3. LAN port 2 4. Management LAN port (Do not use for data) 5. PCI-e slots 6. VGA port for system console monitor 7. USB ports for system console keyboard and mouse 8. RAID controller 9. Fibre Channel card (HP D2D4106fc/4112) Using the ProLiant Guide with HP D2D2502/2504 G2 models When using the HP ProLiant DL160se G6 guide, be aware of the following HP D2D-specific information: • The CPU is the Intel Xeon E5520, part number 506013-001. There is one per system. • The HP D2D has four removable hard disks. • There is no optical media storage. • HP D2D2502 Backup System: The configuration of the system memory is 24 GB (3 x 8 GB DIMMs) for the HP D2D2502 Backup System. HP D2D2504 Backup System: The configuration of the system memory is 32 GB (4 x 8 GB DIMMs). The part number for each 8 GB DIMM is 500662-B21. • The HP D2D is supplied with an HP Smart Array P212 controller (with 512 MB and BBWC) pre-installed in one of the full-height PCI-e slots. For more information about this card, search on http://www.hp.com/support/manuals. Part numbers are as follows: ◦ HP Smart Array P212/Zero Memory Controller: 462828-B21 ◦ 512MB BBWC -Cache and BBWC: 462967-B21 ◦ 512 MB memory: 462975-001 ◦ BBWC: 462976-001 HP D2D and HP ProLiant 9