HP Designjet A3/B How to get good color accuracy in a Proofing Workflow - User - Page 47
Enable, Use Device Independent Color when Printing
View all HP Designjet A3/B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
• Enable "Use Device Independent Color when Printing" check box. This setting assigns color control to the software rip. Now we are ready to send to print: • Go to "File->Print". • Change from "Advance Page Control" to the "Printer Specific Options" • Refer to the section "Printer driver settings for MAC" to continue the process. Moreover you will see that there is another section called "Color". If you go there, you will have the possibility to separate colors and change the screening. The HP Designjet 10ps or 20ps does not support these settings. We recommend selecting "composite" and leaving the other settings by default. Software Applications Notes 47/59
Software Applications Notes
47/59
•
Enable
“
Use Device Independent Color when Printing
”
check
box. This setting assigns color control to the software rip.
Now we are ready to send to print:
•
Go to
“
File->Print
”
.
•
Change from
“
Advance Page Control
”
to the
“
Printer Specific Options
”
•
Refer to the section
“
Printer driver settings for MAC
”
to continue the
process.
Moreover you will see that there is another section called
“
Color
”
. If you go there,
you will have the possibility to separate colors and change the screening. The HP
Designjet 10ps or 20ps does not support these settings. We recommend selecting
“
composite
”
and leaving the other settings by default.