HP Designjet L25500 HP Designjet L25500 Printer Series - User's guide (first e - Page 55
CAUTION, You might feel some resistance when installing the new printhead, so you need
![]() |
View all HP Designjet L25500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
2. Remove the orange protective caps by pulling them down. 3. The printhead is designed to prevent you from accidentally inserting it into the wrong slot. Check that the colored label on the printhead matches the colored label of the carriage slot into which the printhead is to be inserted. 4. Insert the new printhead into its correct slot in the carriage. CAUTION: Insert the printhead slowly and vertically, straight down. It can be damaged if you insert it too quickly, or at an angle, or if you rotate it as you insert it. Handle the ink system 5. Push down as indicated by the arrow. CAUTION: You might feel some resistance when installing the new printhead, so you need to press it down firmly but smoothly. You should hear a beep and see confirmation on the front-panel display that the printhead has been inserted. If you have difficulty, See the Maintenance and troubleshooting guide. ENWW Work with ink system components 51
![](/manual_guide/products/hewlettpackard-designjet-l25500-hp-designjet-l25500-printer-series-users-guide-edition-5b7d786/55.png)