HP Dl180 HP ProLiant DL180 Generation 5 Server Software Configuration Guide - Page 10

System BIOS configuration Table 3 Boot Features fields Field Description Options Resume On LAN Set this value to allow system wake up on LAN from Hibernation. Enabled Cannot wake up the system from Hibernation if set to Disabled Disabled Bootup NumLock Set this value to allow Num Lock on the keyboard to be enabled automatically when the computer system boots up. This allows the immediate use of the numeric keypad located on the right side of the keyboard. To confirm this, the Num Lock LED on the keyboard will be on. This is the default setting. Enabled This option does not enable the keyboard Num Lock automatically. To use the numeric keypad, need press the "Num Lock" key located on the upper left-hand corner of the numeric keypad. The Num Lock LED on the keyboard will be on when Num lock is engaged. Disabled Restore on AC Set this value to restores previous power state before loss occurred. Power Loss Last State Set this value to let system always boot up automatically when AC power is restored. Power on Set this value not to boot up the system until the power button is pressed. Stay Off POST F1 Prompt Set this value to let system wait up to 15 seconds to continue in case POST errors Delayed detected, or press F1to skip it. Set this value to wait indefinitely for an F1 press. Enabled Set this value to boot without waiting for an F1 press. Disabled Advanced menu Figure 5 Advanced menu 10