HP Dl180 HP ProLiant DL180 Generation 5 Server Software Configuration Guide - Page 13

I/O Device Configuration submenu, System BIOS configuration

Get HP Dl180 - G6 E5504 2X2gb 4Lff Svr PDF manuals and user guides
UPC - 883585990917
View all HP Dl180 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

System BIOS configuration Table 6 Harddisk Configuration submenu fields Field Description Set this value to prevent the hard disk drive from being erased. I/O Device Configuration submenu Figure 8 I/O Device Configuration submenu Options Enabled Table 7 I/O Device Configuration submenu fields Option Disabled 3F8/IRQ4 3E8/IRQ4 2E8/IRQ3 2F8/IRQ3 Description Set this value to prevent the serial port from accessing any system resources. When this option is set to Disabled, the serial port physically becomes unavailable Set this value to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt address. This is the default setting. The majority of serial port 1 or COM1 ports on computer systems use IRQ4 and I/O Port 3F8 as the standard setting. The most common serial device connected to this port is a mouse. If the system will not use a serial device, it is best to set this port to Disabled. Set this value to allow the serial port to use 3E8 as its I/O port address and IRQ 4 for the interrupt address. If the system will not use a serial device, it is best to set this port to Disabled. Set this value to allow the serial port to use 2E8 as its I/O port address and IRQ 3 for the interrupt address. If the system will not use a serial device, it is best to set this port to Disabled. Set this value to allow the serial port to use 2F8 as its I/O port address and IRQ 3 for the interrupt address. If the system will not use a serial device, it is best to set this port to Disabled 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
System BIOS configuration
13
Table 6
Harddisk Configuration submenu fields
Field
Description
Options
Set this value to prevent the hard disk drive from being erased.
Enabled
I/O Device Configuration submenu
Figure 8
I/O Device Configuration submenu
Table 7
I/O Device Configuration submenu fields
Option
Description
Disabled
Set this value to prevent the serial port from accessing any system resources. When this option is
set to Disabled, the serial port physically becomes unavailable
3F8/IRQ4
Set this value to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt
address. This is the default setting. The majority of serial port 1 or COM1 ports on computer
systems use IRQ4 and I/O Port 3F8 as the standard setting. The most common serial device
connected to this port is a mouse. If the system will not use a serial device, it is best to set this port
to Disabled.
3E8/IRQ4
Set this value to allow the serial port to use 3E8 as its I/O port address and IRQ 4 for the interrupt
address. If the system will not use a serial device, it is best to set this port to Disabled.
2E8/IRQ3
Set this value to allow the serial port to use 2E8 as its I/O port address and IRQ 3 for the interrupt
address. If the system will not use a serial device, it is best to set this port to Disabled.
2F8/IRQ3
Set this value to allow the serial port to use 2F8 as its I/O port address and IRQ 3 for the interrupt
address. If the system will not use a serial device, it is best to set this port to Disabled