HP Dx5150 Desktop Management Guide (3rd Edition) - Page 26
Entering a Supervisor Password, Start > Shut Down > Restart., Enter Password
UPC - 882780485433
View all HP Dx5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Desktop Management Guide If you enter the password incorrectly, the message "Invalid Password, Press any key to continue!" appears. Try again. After three unsuccessful tries, you must turn off the computer, then turn it on again before you can continue. Entering a Supervisor Password If the system is equipped with an embedded security device, refer to HP ProtectTools Embedded Security Guide, on the Documentation CD. If a Supervisor password has been established on the computer, you will be prompted to enter it each time you run Computer Setup. 1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart. 2. As soon as the computer is turned on, press and hold the F10 key until you enter Computer Setup. Press Enter to bypass the title screen, if necessary. ✎ If you do not press the F10 key at the appropriate time, you must restart the computer and press and hold the F10 key again to access the utility. If you are using a PS/2 keyboard, you may see a Keyboard Error message-disregard it. 3. When the Enter Password box appears on the monitor, type the Supervisor password, then press Enter. ✎ Type carefully; for security reasons, the characters you type do not appear on the screen. If you enter the password incorrectly, the message "Invalid Password, Press any key to continue!" appears. Try again. After three unsuccessful tries, you must turn off the computer, then turn it on again before you can continue. 22 www.hp.com Desktop Management Guide