HP ENVY 13-d000 Maintenance and Service Guide - Page 39
Solid-state drive, Remove the bottom cover see
View all HP ENVY 13-d000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4. Remove the battery (4). Reverse this procedure to install the battery. Solid-state drive Description 512-MB, M2, SATA-3, supporting TLC 256-MB, M2, SATA-3, supporting TLC 128-MB, M2, SATA-3, supporting TLC 128-MB, M2.2280, SATA-3 Solid-state Drive Hardware Kit Spare part number 814224-001 812708-001 820547-001 829985-001 829300-001 Before removing the solid-state drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 26). 5. Disconnect the battery cable from the system board (see Battery on page 28). Remove the solid-state drive: Component replacement procedures 29